ICOM IC-R6 SCANNER 150KHZ-1300MHZ

2 495 SEK
Not available
Product reminder

Enter your e-mail address below and we will notify you when the product is available! Your e-mail address will be stored up to 180 days.

Product Description:
Icom R6 is a very small scanner that handles a very large frequency range with excellent receiver sensitivity and is not affected by interference. Can listen to industrial radio, amateur radio, aircraft radio, shortwave broadcasts, TV audio etc.

1300 MEMORIES
The Icom IC-R6 has 1000 memory channels, 50 tape scan limits and 200 memory channels

for automatic storage during search. The standard channels can be divided into 22

memory banks

(max 100 channels per bank). Each channel can also be given a name of up to 6 characters.

SUPPLY WITH EXTERNAL VOLTAGE (MAX 6VDC)
IC-R6 has an input for power supply from wall charger (BC-136E) or

cigarette lighter cable (CP-18E).

The NiMH batteries are charged even when the receiver is connected.

DIFFERENT SEARCH FUNCTIONS
IC-R6 supports 9 different search types to take full advantage of the receiver's features.

In "Auto memory scan" a defined frequency range and when a signal is scanned

perceived,

it is automatically stored in a memory with frequency, mode of operation and any tone signal.

NOISE BLOCK FOR SUBTON (CTCSS) AND DTCS
If you want a quiet pass at stations that use any of the above

system for opening, this feature is excellent.

EASY OPERATION
Using the [BAND] button, you can easily access one of 11 pre-programmed

band. The appropriate mode of transport for this band is selected automatically. [BAND], [TS], [Mode]

and the [V / M] buttons have been enlarged to facilitate operation and the window displays a wealth of information

PROGRAMMING / CLONING VIA USB CABLE
The IC-R6 can be programmed from a computer using the optional OPC-478UC accessory cable.

Using software CS-R6 (purchased separately), channel, bank, search settings, etc. can be programmed.

ANTENNA SELECTION FOR AM FLIGHT AND FM
You can listen to medium wave with the built-in ferrite antenna and use

the headphone cable as an antenna instead of the regular rubber stick. You choose

antenna type in "SET mode".

DELIVERED WITH
2 AA NiMH batteries (1.2V 1400mAh)
FA-S270C rubber antenna
BC-196SD wall charger (4.5VDC 400mAh)
Belt clips
Wrist strap

Frequency range 100kHz-1309.995MHz
Fast scanning speed, up to 100 channels / second
Improved sound, 150mW - Large speaker 36 mm diameter
VSC (Voice Scan Control), if it stops on a non-modulated signal (eg interference),
it proceeds automatically, after a few seconds.
Up to 15 hours of operating time (with 2 1400mAh NiMH batteries)
Lower power consumption
Automatic shutdown (0.5-2 hours)


The product has been added to your cart

To CheckoutContinue shopping
Categories
Customer's Area
Tips and instructions
SvenskaEnglishNorskDansk